Ruuvi Station

RuuviTag Pro (2 in 1). BT range is max 10m. Useless because of this. Tested with two phones. Am I missing something??? Edit after response: This was outside, with a clear line of sight. I now managed to get 20m. But still this is far below what was promised.

Not even the sensor gives useful data, really bad product

Lightning fast onboarding experience! Kudos to the UX team!

on todella huono uudistus että viivaa ei piirretä kundataa puuttu..pitäisi olla ainakin mahdollisuus itse valita haluaako vai ei. luettavuus mennyt huonompaa suuntaa ->History readability improved when there are no recorded datapoints in chart

This app helps me monitor the humidity of my guitar cases easily. The app comes with a widget that I can use to check those humidities from my home screen, which is really nice.

Right.... before the "improvement" update I could see the whole situation of a sensor with 1 glimpse. Now info is shown only in multiscreen which is useless slide-thisway-thatway-and-then-restart-concoction. If you insist on doing questionable changes, please at least make them optional. ... and you still have not included the 'Read Data From ALL Sensors' button...

Gute Software. Einziger negativer Punkt: die Ruuvi Sensoren sind scheinbar nicht kalibriert und weichen stark voneinander ab. Drei nebeneinander gelegt: 24,2 vs. 24,6 vs. 25,0°C. Offsetwerte gelten nur in der App, nicht in den Sensoren. Hat man mehrere BLE Empfänger muss jeder kalibriert werden. Ein Sensor wurde mit leerer Batterie geliefert (2,8V).

Will review when I have more info

Sensors are added instantly, sensor measurements are updated frequently, UI is clear and nice

Update. The sensors are connected to a Victron Cerbo with a Bluetooth extender. Original post. I am using this product for refrigerator and freezer monitoring. The Bluetooth signal is not great. The sensors are less than 8 feet apart and drop connectivity at least once per week while other sensors do not

Excelent!

Works fine for measuring temps in my van, and connects (via BT) to my electrical system fine. It'd be cool to see an estimated Dew Point Temperature calculated in the app along with the other data, that way I could estimate if I think I'll get condensation inside my van or not. It's possible with the data already presented, and could be rounded to nearest whole integer (based on rounded whole integer temp) for the sake of multiple calculations as temp fluctuates by .x° E: Found it in settings!!

Hyvä sensori ja toimii luotettavasti. Rahastuksen makua valitettavasti monessa kohdassa. Sensori ei osaa kerätä mitään lokia vaan raportoi pistemäisen mittausdatan vain luettaessa. Hälytysrajat siis näin ollen täysin turhia. Myös widgetit täysi pettymys, sillä eivät näytä mitään kun itsellä ei muutaman satasen Ruuvi Stationia ole. Pelkkä sensori siis pelkkä sisäänheittotuote.. Edit: Kiitos vastauksesta! Hyviä vinkkejä ja parantavat käyttöä huomattavasti. Lisäsin tähtiä!

Was working fine but now nothing is working. I tryed everything even deleting and resetting device. Now getting this pop up from the this app. Something went wrong with Ruuvi Station Ruuvi Station closed because this app has a bug. Try updating this app after its developer provides a fix for this error.

Ruuvi temperature sensors work phenomenally!

love these things. best thing we have added recently

Edit: My only issue with the app has been fixed. Thanks for the great work! The latest upgrade added a popup nagging me too enable notifications. I'm not interested in notifications and have no plans to enable them, yet the app keeps nagging no matter how many times I swipe the popup away. Otherwise the app is great, but this small issue is super annoying. Hope to see a fix soon.

In the old version, it would open with a full view. Now it opens only a tiny screen on the sensor data. Changing the settings to full view is possible, but these changed settings are not stored, so every time when you reopen, again you have this tiny view.

great tool to track temps remotely!

Outstanding! Easy to set up and extremely useful. If you are looking to purchase sensors, call Backwoods Solar. They have them in stock.

smoooooooooooooth

The best Hygrometers and Room Thermometers. Can track my sensors anywhere in the house although it takes a bit of time as the Bluetooth signal needs to travel through walls and such. Small and compact can fit in anything even a Mason jar. I have one tracking the temperature and humidity of storage under the stairs where I keep my natural wine! Not optimal ~17 degrees under the stairs but I know now that I need to improve it. Oh and 7 days tracking of Temperature, Humidity and Air Pressure 👌!

seem to work flawlessly.

very useful information

I always have to turn my Bluetooth off and on again, otherwise the sync never happens.

Work with my cheap adroid box (9.0)RK3328A ,nice when you updated,thankyou.

Just received my Ruuvi sensor and it worked great.

Seems fine for the most part. Why do you need a gateway to use the widgets??? Or at least, when trying to set a widget, no sensors are found on the list (despite them working fine on the app) and it says you can use a widget if your sensors are in range of a gateway... || Edit after dev reply: The app appears to let you log data in the background (Background Scanning Settings). If nothing else, I don't see why the widget couldn't just read that very same log to display the latest recorded value.

Handy, simple app. Accurate sensors. Wish I didn't need to make an account for some functions, though. Same with toggling location access just to read Bluetooth sensors.

Otherwise great, but the widget is not working despite being in range and signed in. Cannot add a tag, just prompts a text "You can use Ruuvi widgets if you are in range..." Edit: Got an answer to the issue, maybe the text should be bit more clear so it explains that you need the gateway. Apart from that issue, 5/5!

works fine with app, but integration with home assistant or other automation system is way more painful than it should be

Could use some usability improvements

[Updated]I like the Ruuvi app for the Android but my RuuviPro is not showing humidity, which is selected, while showing an alert for movement, which is not desired/selected. (It appears that the Ruuvi Pro doesn't have air pressure measurement and, based upon the comments on the Ruuvi forum, this continues to be a marketing/communications issue.)

Functional. Simple. Good.

works perfectly

First few weeks it has worked like a charm... time will show.

app itself works. Tags waaay too unprecise for measuring (specs notes this too, in fineprint. Better off to get a 2$ regular thermometer.

Ruuvi needs to have a way to send information ovet the phone network. Through ethernet it's not useful. With Ethernet you will most likely be very close to the measured target so it's not useful. With GSM locations could be monitored remotely.

Easy to use app

Average temperatures could be visible in the stats but otherwise everything just works. Now I get a notification when the sauna is ready.

Would there be an option import&export sensors? Needed when changing phone etc..

Would love to see a home screen widget that displays current data, or the current data accessable by using Tasker for creating data driven tasks.

Ruuvi application requires location and internet access consent. It does not work without it. The app does not explain why it needs the access and what data Ruuvi collects and why. There is no disclosure on Ruuvi web, pre or post sale. I am RETURNING the devices for REFUND. Responding to Ruuvi comment - it contains no commitment or privacy disclosure. Ruuvi should address user privacy and device functionality publically before sale. Without it - the application consent is what matters.

Hälytyksistä tulee ilmoitus vain jos avaa sovelluksen. Mikä idea siinä on?

Wow great on android no graphs for ios

yksinkertainen, nopea ottaa käyttöön. toimii.

Best Sensor/ App I've used so far. Looks great, works right out of the box.

The history function update is just what I needed. Be sure to update your tag firmware!

The sensor are super unresponsive, and there is no way to get them to send refresh data on command. Some times takes me 5 to 10 minutes just to get the darn thing to update. I can't recommend this thing until that's fixed....*STAY AWAY FROM THESE*

useless.. none response

Sensors are great, work perfectly! Unfortunately one must grant location services access to the app, although on two of my Samsung devices, I can connect to the sensors without granting permission. The location requirements is intrusive. The constant nagging about location permission is unwelcome. The tags are awesome though! Individual needs to weigh privacy vs functionality.

Lacking some basic functions e.g. average readings for last 24h and similar. App is a little clunky in how you scroll through the graphs. Background reding, logging fails seemingly at random regardless of settings in the app.

Great app! But there is no homescreen widget available. Please add widget function to the app and it will be 5/5.

not bad

does what it promises. hope to get database feature for collecting data history on device without 3rd party apps.

Easy to set up

I'd like to see a widget-feature added to this app in order to have a view on one of my phone homescreens

Otherwise a very nice app, but sometimes goes haywire and starts recording every single message from all the nearby Ruuvi tags, eating the battery like crazy.

No GPS tracker and each time I go far away from the beacon and come back to it the app does not recognize it or perceive it. I was hoping for more...